WorkspaceManager_Dlg-PCBLibUpdateFormUpdate From PCB Libraries_AD
Created: February 20, 2016 | Updated: May 03, 2018
| Applies to versions: 15.1, 16.0, 16.1, 17.0, 17.1 and 18.0
Now reading version 15.1. For the latest, read: WorkspaceManager_Dlg-PCBLibUpdateForm((Update From PCB Libraries))_AD for version 22
The Update From PCB Libraries dialog
Summary
The Update From PCB Libraries dialog provides controls to to choose which component and library footprints to update from the PCB library.
Access
The dialog is accessed by clicking OK in the Update From PCB Libraries - Options dialog (Tools » Update From PCB Libraries).
Options/Controls
This dialog is divided into two main regions:
- Upper Grid Region - this region lists the component footprints that were compared with library footprints. The top header line is a summary of the matched items.
- Difference Details - this region shows the differences for the layer according to the chosen layer tab.
Upper Grid Region
- PCB Components - lists the PCB components within the PCB library.
- Designator - the designator of the PCB component.
- Footprint - the component footprint name.
- Library Footprints To Compare Against
- Update All - use the drop-down and select from the following:
- Update All - enable all Update boxes.
- Update None - do not enable any Update boxes.
- Update Selected - enable Update box for only those components that are selected.
- Don't Update Selected - do not update any selected components.
Difference Details
- All Layers tab - displays component information for all layers.
- Component Primitives causing Differences for - this region lists the component primitive(s) that caused the difference(s) on the left and displays the listed data on the right. Information listed includes:
- Object Type - the type of object.
- Identifier - lists any special designator information.
- Detail - displays details of the component primitive.
- Component Primitives causing Differences for - this region lists the component primitive(s) that caused the difference(s) on the left and displays the listed data on the right. Information listed includes:
- Specific layer tabs - displays component information for specific layers, for example, Mechanical 13, BodyBot, Top Solder, etc.
- Component Primitives causing Differences for - this region lists the component primitive(s) that caused the difference(s) on the left and displays the listed data on the right. Information includes:
- Object Type - the type of object.
- Identifier - lists any special designator information.
- Detail - displays details of the component primitive.
- Component Primitives causing Differences for - this region lists the component primitive(s) that caused the difference(s) on the left and displays the listed data on the right. Information includes:
- Highlight Cell Density - use the slider bar to increase (to the right) or decrease (to the left) the size of the cells in the display area.
- Display area - this region is a display of the component selected in the Component Primitives causing Differences for region.
Additional Controls
- The following commands are available on the right-click menu in the display area:
- Zoom In - use to zoom in.
- Zoom Out - use to zoom out.
- Fit Component - use to fit the component within the display area.
- Pan - use to pan right or left within the display area. The direction of the panning depends on the location of the cursor when the right-click is performed. If the cursor is on the right-hand side of the display area, it will pan to the right; if cursor is near the top of the display area, it will pan upwards, and so on. Panning is done in increments so that each time Pan is clicked, the display will pan further in the chosen direction.
- Refresh - use to refresh the display after making any changes.
- Create Report - click to compare and create a Footprint Comparison Report. The Footprint Comparison Report opens automatically.
-
Accept Changes (Create ECO) - click to accept the changes and create an Engineering Change Order dialog.