Dialog-Edit Aperture

Now reading version 22.0. For the latest, read: Dialog-((Edit Aperture)) for version 21
 
 
 
 
 

The Aperture dialog
The Aperture dialog

Summary

The Aperture dialog provides controls to set up the required aperture information for the design.

Access

The dialog is accessed by performing the following steps:

  1. In the Apertures tab of the Gerber Setup dialog, disable the Embedded apertures (RS274X) option.
  2. Click the New button under the Apertures List region.
  3. Click OK in the resulting DCode dialog.

Options/Controls

  • X Size – specify the X size for the aperture.
  • Y Size – specify the Y size for the aperture.
  • Corner Radius – specify the corner radius of the aperture. This option is only available when Rounded Rectangle is selected for Shape.
  • Hole Size – specify the hole size for the aperture.
  • Shape – use the drop-down to select the shape for aperture. Options include: Rounded, Rectangle, Octagonal, Rounded Rectangle, and Relief.
  • Use For – use the drop-down to select the purpose of the aperture. Options include: Anything, Drawing and Flashing.
  • Rotation – specify the rotation angle of the aperture.
  • X Offset – specify the offset in X direction. This option is not available if Relief is selected for Shape.
  • Y Offset – specify the offset in Y direction. This option is not available if Relief is selected for Shape.
  • The following entries are available only when Relief is selected for Shape:
    • Relief Width – specify the width of the relief connection. 
    • Relief Gap – specify the width of each air gap in the relief connection. 
    • Hole Type – use the drop-down to select the hole type. Options include: RoundSquare and Slot.
    • Relief Entries – select 2 or 4 for the number of relief entries to be applied to the aperture. 
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.

콘텐츠