Altium Designer 기술문서
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
WorkspaceManager_Dlg-AnsysEDBExportOptionsAnsys EDB Export Options_AD
Created: April 27, 2021 | Updated: May 11, 2021
| Applies to version: 21
Now reading version 22.0. For the latest, read: WorkspaceManager_Dlg-AnsysEDBExportOptions((Ansys EDB Export Options))_AD for version 21
Summary
The Ansys EDB Export Options dialog is used to configure what is to be included when exporting Ansys EDB files.
Access
The dialog is accessed from the PCB editor by selecting File » Export » Ansys EDB.
Options/Controls
Component Types
- Resistors - enter the resistor component value that is mapped to the property for RLC components in the Ansys component model that you want to be included in the export process.
- Capacitors - enter the capacitor component value that is mapped to the property for RLC components in the Ansys component model that you want to be included in the export process.
- Inductors - enter the inductor component value that is mapped to the property for RLC components in the Ansys component model that you want to be included in the export process.
- Integrated Circuits - enter the integrated circuit component value that is mapped to the property for RLC components in the Ansys component model that you want to be included in the export process.
- Input/Output - enter the input/output component value that is mapped to the property for RLC components in the Ansys component model that you want to be included in the export process.
Units
Select either Imperial or Metric to be used as the preferred unit of measurement during export.
Others
Merge Net Tie Nets - when enabled, if a design contains nets connected by Net-Tie components, these nets will report as distinguished single nets in the netlist.