Altium Designer 기술문서
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
WorkspaceManager_Dlg-AddCatalogItemToBOMFormAdd to BOM Components_AD
Created: February 14, 2016 | Updated: June 16, 2017
| Applies to versions: 15.1, 16.0, 16.1 and 17.0
Now reading version 16.1. For the latest, read: WorkspaceManager_Dlg-AddCatalogItemToBOMForm((Add to BOM Components))_AD for version 17.1
The full and abbreviated versions of the Add to BOM Components dialog
Summary
The Add to BOM Components dialog is used to add BOM catalog items to the BOM components.
Access
The dialog is accessed from a *.BomDoc in the following ways:
- On the BOM Components tab:
- Click Add from Catalog located in the menu items under the tab name.
- Right-click in the main grid area then select Add from Catalog.
- On the BOM Catalog tab:
- Click Add to BOM located in the menu items under the tab name.
- Right-click in the main grid area then select Add instances of [Design Item Id] to BOM.
Options/Controls
- Choose BOM Catalog Item from List - this region lists BOM catalog items that are available to add to the BOM components. Information listed includes:
- Item Type
- Design Item Id
- Catalog Item Source
- Description
- Designator Prefix - use to specify the designator prefix of the item. Enter the designator prefix or hover the cursor over the right-hand side of the text box to access a drop down from which you can select the designator prefix.
- Separator - use to specify the separator. Enter the separator or hover the cursor over the right-hand side of the text box to access a drop down from which you can select the separator.
- Quantity - use to specify the quantity of the item. Enter the quantity or hover the cursor over the right-hand side of the text box to access up and down arrows to select the quantity.