WorkspaceManager_Cmd-VaultCategory_CreateComponentVaultCategory_CreateComponent_AD

Created: June 24, 2021 | Updated: June 30, 2021 | Applies to version: 21

This document is no longer available beyond version 21. Information can now be found here: Creating a New Component from the Projects Panel for version 25

Parent page: WorkspaceManager Commands

The following pre-packaged resource, derived from this base command, is available:

Create Component

Applied Parameters: None

Summary

This command is used to create a new component in an Altium Designer Workspace.

For more information about on-site servers and Workspaces, see Altium Concord Pro.

This command is only available if you are connected to an on-site server or Altium Designer Workspace.

Access

When signed into a Workspace, right-click on the entry in the Projects panel then choose Create Component from the menu.

Use

After the command is selected, the Create new component dialog opens in which you can select the component type. After clicking OK, the component editor opens in which you can configure the new component.

프린터 출력용 버전

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.

WorkspaceManager_Cmd-VaultCategory_CreateComponentVaultCategory_CreateComponent_AD

Summary

Access

Use

Was this page helpful?