Altium Designer 기술문서
...
((Design Objects Reference))_AD
Schematic Design Objects in Altium Designer
Working with a Bezier Object on a Schematic Sheet in Altium Designer
Parent page: Schematic Objects
A placed Bezier curve
Summary
A Bezier curve is a non-electrical drawing primitive. It is a free-form curved line that can be placed on a schematic sheet. The curve is defined by a series of vertex points that 'pull' the line into a curved shape.
Availability
Beziers are available for placement in both Schematic and Schematic Library Editors:
- Schematic Editor - the following commands are available:
- Choose Place » Drawing Tools » Bezier from the main menus.
- Click the Bezier button (
) in the graphic objects drop-down on the Active Bar located at the top of the workspace. Click and hold an Active Bar button to access other related commands. Once a command has been used, it will become the top-most item on that section of the Active Bar. - Right-click in the workspace then choose Place » Drawing Tools » Bezier from the context menu.
- Schematic Library Editor - the following commands are available:
- Choose Place » Bezier from the main menus.
- Click the Bezier button () in the graphic objects drop-down on the Active Bar located at the top of the workspace. Click and hold an Active Bar button to access other related commands. Once a command has been used, it will become the top-most item on that section of the Active Bar.
- Right-click in the workspace then choose Place » Bezier from the context menu.
Placement
After launching the command, the cursor will change to a cross-hair and you will enter Bezier placement mode. Placement is made by performing the following sequence of actions:
- Click or press Enter to anchor the starting point for the curve.
- Move the cursor and click or press Enter to place a series of vertex points to define the curve. As you move the cursor, the curve will be continually redrawn to indicate how it would look if you placed a vertex at the cursor position.
- After placing the final vertex point, right-click or press Esc to complete placement of the curve.
- Continue placing further Bezier curves or right-click or press Esc to exit placement mode.
Additional actions that can be performed during placement while the Bezier is still floating on the cursor are:
- Press the Tab key to pause the placement and access the Bezier mode of the Properties panel from where its properties can be changed on-the-fly. Click the workspace pause button overlay (
) to resume placement. - Press the Alt key to constrain the direction of movement to the horizontal or vertical axis depending on the initial direction of movement.
Graphical Editing
This method of editing allows you to select a placed Bezier object directly in the workspace and change its size and/or shape graphically.
When a Bezier object is selected, the following editing handles are available:
A selected Bezier curve
- Click and drag an editing handle to "bend" the curve.
- Click anywhere on the Bezier away from editing handles and drag to reposition it. While dragging, the Bezier can be rotated (Spacebar/Shift+Spacebar) or mirrored (X or Y keys to mirror along the X-axis or Y-axis).
Non-Graphical Editing
The following methods of non-graphical editing are available:
Via the Properties Panel
Properties page: Bezier Properties
This method of editing uses the associated Properties panel mode to modify the properties of a Bezier object.
The Bezier mode of the Properties panel
During placement, the Bezier mode of the Properties panel can be accessed by pressing the Tab key.
After placement, the Bezier mode of the Properties panel can be accessed in one of the following ways:
- Double-click on the placed Bezier.
- Place the cursor over the Bezier, right-click then choose Properties from the context menu.
- If the Properties panel is already active, select the Bezier object.
Via a List Panel
Panel pages: SCH List, SCHLIB List, SCH Filter, SCHLIB Filter
A List panel allows you to display design objects from one or more documents in tabular format, enabling quick inspection and modification of object attributes. Used in conjunction with appropriate filtering - by using the applicable Filter panel, or the Find Similar Objects dialog - it enables the display of just those objects falling under the scope of the active filter allowing you to target and edit multiple design objects with greater accuracy and efficiency.