Sch_Dlg-RoundingcoordinatesofobjectsRounding Coordinates of Objects_AD

The Rounding coordinates of objects dialogThe Rounding coordinates of objects dialog

Summary

The Rounding coordinates of objects dialog is used to define which documents the rounding process will be applied to - either the current document only, all schematic documents in the current (active) project, or all open schematic documents regardless of the project to which they belong.

Access

The dialog is accessed from the schematic editor by clicking Tools » Convert » Round coordinates of objects from the main menus.

Options/Controls

Choose Document Scope

  • Just this document - round coordinates only for the current document.
  • All schematic documents in the current project - round coordinates for all schematic documents of the current project. Schematic documents of the current project that are currently closed will be opened.
  • All open schematic documents - round coordinates for all the schematic documents that are currently opened regardless of the project to which they belong.
After you make your selection and click OK, an information dialog will open that summarizes how many objects on how many documents had their coordinates rounded.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.