Sch_Dlg-ResetPartSheetSymbolUniqueIDsReset Part and Sheet Symbol Unique IDs_AD

The Reset Part / Sheet Symbol Unique IDs dialog
The Reset Part / Sheet Symbol Unique IDs dialog

Summary

This dialog allows you to reset the Unique IDs for Parts and Sheet Symbols.

The component UID is used to link each schematic component to its PCB component. If these are reset, you will need to re-establish the link, which can be done at any time by selecting the Project » Component Links command in the PCB editor. This command updates each PCB UID to match the current schematic UID. Note that when the UIDs are not matching, the software relies on the designators instead, therefore, these should be matching before resetting schematic component UIDs.

Access

The dialog is accessed from the schematic editor by clicking Tools » Convert » Reset Component Unique IDs from the main menus.

Options/Controls

Reset Component UIDs

  • Reset Duplicates - Select this option to reset duplicate UIDs only.
  • Reset All Component Unique IDs - Select this option to reset all UIDs.

Choose Document Scope

  • Just this document - Select this option to reset Unique ID for the current document only.
  • All schematic documents in the current project - Select this option to reset Unique IDs for the current project only.
  • All open schematic documents - Select this option to reset Unique IDs for all open schematics.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.