Sch_Dlg-PlacePredefinedConnectorFormPlace Predefined Harness Connector_AD

This document is no longer available beyond version 22.0. Information can now be found here: Re-using a Signal Harness for version 25

The Place Predefined Harness Connector dialog
The Place Predefined Harness Connector dialog

Summary

The Place Predefined Harness Connector dialog provides controls to edit the properties of the harness connector to be placed. The dialog lists all harness types (from defined harness definition files) across all open projects and also in any Device Sheet folders specified on the Data Management - Device Sheets page of the Preferences dialog. By default, the dialog is opened with your current project expanded.

Access

Select Place » Harness » Predefined Harness Connector from the main menus.

Options/Controls

Harness Connectors

  • Harnesses Connector List - a list of pre-defined, existing harness connectors from the currently opened projects. After selecting a harness connector from this list, add ports and/or signal harnesses and adjust their properties on the right side of the dialog.
  • Filter - enter a search string. The Harness Connector List is filtered with connectors that match the string. You can use any character, a series of characters, or a wildcard (*) in the field. For example, type the string m to display all files that start with the letter m.

Additional Objects

  • Add Port - Enable this option to automatically create a port for this connector when it is placed on the schematic sheet.
    • Name - Enter a port name that for the new port attached to the pre-defined harness connector. The default name is HarnessPort.
    • Width - Enter a new value for the port width. The default value is 50 units long. You can always graphically resize the attached port after you have placed the new harness connector.
    • Auto - Enable this option and the port width is automatically resized depending on the size of the port's text. This option is disabled and the width of 50 units is used by default.
  • Add Signal Harness - Enable this option to automatically create a signal harness for this connector when it is placed on the schematic sheet.
    • Harness Length -  Enter a value for the harness length. You can always graphically resize the signal harness after you have placed the new harness connector.
  • Sort Harness Entries - Check this option to sort the harness entries within the chosen harness when it is placed. The harness entries are sorted alphanumerically.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.

콘텐츠