Altium Designer 기술문서
...
((Dialog Reference))_AD
Dialogs((M to R))_AD
Sch_Dlg-ModelManagerFormModel Manager_AD
Created: June 17, 2022 | Updated: June 17, 2022
| Applies to version: 22
This document is no longer available beyond version 22. Information can now be found here: Adding Models Using the Model Manager Dialog for version 25
The Model Manager dialog
Summary
The Model Manager dialog provides controls to add, remove or edit models for schematic symbols.
Access
The dialog is accessed from the schematic library editor in the following ways:
- Click Tools » Model Manager from the main menus.
- Right-click on a component in the SCH Library panel then select Model Manager from the context menu.
Options/Controls
The left region displays all existing components in the current schematic library; the right region displays related PCB models and preview.
- Mask – type a component name in this field to filter the contents. Use "
*" as a wildcard character. - Component list – lists all existing components in the current schematic library and their description.
- Model list – lists all models related to the selected component. The right-click menu of this region includes commands to Add, Copy, Paste, Remove, or Edit a model.
- Add – click to access a drop-down to choose from the model options listed below. For each option, an associated dialog will open to allow you to customize (if necessary) and add the desired model.
Footprint– physical layout that is required on the printed circuit board in order to mount a component or physical attachment.-
Pin Info– add a Pin Info file, which can be used as an FPGA/MC pin description for any third-party FPGA tools, or for other types of components. PCB3D– add a 3D model to the component.Simulation– add a spice model to the component if you want to run a circuit simulation.Ibis Model– add an Ibis model to enhance the modeling of IC pins while performing Signal Integrity analyses.Signal Integrity– add a Signal Integrity model to configure and control signal integrity analyses.
- Copy – click to copy the desired model from the list.
- Paste – click to paste a model into the list. The new model will appear at the bottom of the list.
- Remove – click to remove a selected footprint(s).
- Edit – click to open the PCB Model dialog in which you can edit an existing model.
- Refresh Preview – click to refresh the model preview. Click 2D/3D to toggle between the 2D and 3D preview.