Sch_Dlg-JumpComponentDialogComponent Designator (SCH) _AD

The Component Designator dialog
The Component Designator dialog

Summary

This dialog allows you to jump to a specific component on a schematic sheet, targeted by its logical or physical designator.

Access

From the Schematic Editor, use the Edit » Jump » Jump Component command from the main menus.

Options/Controls

  • Designator Entry Field - enter the component designator string for the component to which you want to jump.
  • Physical - enable this option to confine the jump feature to only physical component designators, i.e. those appearing on the Compiled Document tabbed views of the source schematic documents after the project has been compiled. With this option disabled, the jump feature will only consider logical designators, i.e. those appearing on the Editor tabbed views of the source schematic documents.
The project must be compiled before physical designators can be used as the target for a jump.
For a multi-part component, just enter the core designator without part information (e.g., U2 and not U2A).

Tips

  • When a valid component designator is entered and the OK button is clicked, the found component is zoomed and centered in the main design window. For a multi-part component, the first part will be highlighted with the Find Text - Jump dialog opened. Use this dialog to jump between sub-parts of the component.
  • The found component (or all parts for a multi-part component) is also listed in the Messages panel. Double-click a message entry to jump to that component (or part thereof) in the workspace.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.