Sch_Dlg-GetLongTextDialogText Entry_AD

Now reading version 16.0. For the latest, read: Sch_Dlg-GetLongTextDialog((Text Entry))_AD for version 17.1

The two incarnations of the Text Entry dialog
The two incarnations of the Text Entry dialog

Summary

This dialog allows the designer to enter text. While the controls of the dialog remain the same, its banner text will change depending on whether it was accessed to enter text for a Note object or a Text Frame object.

Access

The dialog is accessed in the following ways:

  • By clicking the Change button associated to the Text field, in the Properties region of the Note dialog.
  • By clicking the Change button associated to the Text field, in the Properties region of the Text Frame dialog.

Options/Controls

Use the main window of the dialog to enter the required text. The dialog supports standard text operations, including: Cut, Copy, Paste, and Delete. Commands for these actions can be found on the right-click menu, along with the ability to Select All text currently entered and Undo any action.

The reading order for the text can also be changed, using the right-click menu's Right to left Reading order toggle control.

Unicode support is available courtesy of the right-click menu's Insert Unicode control character sub-menu. The following control characters are available:

  • LRM - left-to-right mark
  • RLM - right-to-left mark
  • ZWJ - zero width joiner
  • ZWNJ - zero width non-joiner
  • LRE - start of left-to-right embedding
  • RLE - start of right-to-left embedding
  • LRO - start of left-to-right override
  • RLO - start of right-to-left override
  • PDF - pop directional formatting
  • NADS - national digit shapes substitution
  • NODS - nominal (European) digit shapes
  • ASS - activate symmetric swapping
  • ISS - inhibit symmetric swapping
  • AAFS - activate Arabic form shaping
  • IAFS - inhibit Arabic form shaping
  • RS - record separator (Block separator)
  • US - unit separator (Segment separator)
Enable the display of Unicode control characters using the right-click menu's Show Unicode control characters toggle control.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.