Sch_Dlg-ChooseDocumentToPlaceChoose Document to Place_AD

The Choose Document to Place dialog

Summary

This dialog allows you to choose the target schematic document that is to be referenced by a newly-created sheet symbol when using the Create Sheet Symbol From Sheet command.

Ensure the sheet that is to include the sheet symbol is the active document before accessing this dialog.

Access

The dialog is accessed from the schematic editor in the following ways:

  • Click Design » Create Sheet Symbol From Sheet from the main menus.
  • Right-click in the design workspace away from any design objects then click Sheet Actions » Create Sheet Symbol From Sheet.

Options/Controls

The main area of the dialog lists all candidate schematic documents for the project that legitimately can be used as the target reference sub-sheet for the new sheet symbol. Each document is listed in terms of its name and path to the folder in which it resides. Click on an entry to select the required document.

Since the sheet symbol is created and placed on the active sheet, this sheet will not be listed because a sheet symbol cannot reference the same sheet on which it is itself placed.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.