Query_Lang-PCBFunctions_AttributeChecks_NetLengthNetLength_AD

Created: September 11, 2015 | Updated: August 10, 2021 | Applies to versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Now reading version 18.1. For the latest, read: Query_Lang-PCBFunctions_AttributeChecks_NetLength((NetLength))_AD for version 21

참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.

Parent page: PCB Query Functions - Attribute Checks

Summary Copy Link Copied

Returns Net objects where the total length of arcs and tracks in those nets complies with the Query.

The length of each track is the (Pythagorean) distance between its end points, and is equal to SQRT(SQR(X1 - X2) + SQR(Y1 - Y2)), where X1,Y1 are the coordinates of one end of the track, and X2,Y2 are the coordinates of its other end. The length of each arc is the product of its Radius and the difference between its End Angle and Start Angle, when that difference is measured in units of radians. (180 degrees = pi radians.)

Syntax Copy Link Copied

NetLength : Number

The entered length is always in units of mils, irrespective of the measurement unit chosen for the board. (1 mil = 0.001 inch).

Example Usage Copy Link Copied

NetLength = 30000
Returns all Net objects where the total length of arcs and tracks in those nets is equal to 30000mil.

NetLength >= 15000
Returns all Net objects where the total length of arcs and tracks in those nets is greater than or equal to 15000mil.

NetLength <> 5500
Returns all Net objects where the total length of arcs and tracks in those nets is not equal to 5500mil.

Tips Copy Link Copied

The associated child objects of the complying Net objects are also returned.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

프린터 출력용 버전

참고