Altium Designer 기술문서
...
((Dialog Reference))_AD
Dialogs((S to Z))_AD
PCB_Dlg-Reconnect_OptionsFormSubnet Connector_AD
Created: July 28, 2015 | Updated: June 19, 2017
| Applies to versions: 15.1, 16.0 and 16.1
Now reading version 15.1. For the latest, read: PCB_Dlg-Reconnect_OptionsForm((Subnet Connector))_AD for version 22
The Subnet Connector dialog.
Summary
This dialog allows the designer to specify the maximum subnet separation.
Access
From the toolbar in the PCB Editor, select Auto Route » Add Subnet Jumpers.
Options/Controls
- Maximum Subnet Separation - Enter a value for the maximum subnet separation (100mil is the default value) of incomplete routing segments.
- Run - Click to automatically add subnet connectors to complete short routing segments (tracks that still have connection lines in between) on the current PCB document.
Click Cancel to exit the dialog without saving changes.