PCB_Dlg-JumpToPadNumberJump To Pad Number_AD

Created: October 10, 2017 | Updated: October 10, 2017 | Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21

Now reading version 20.0. For the latest, read: PCB_Dlg-JumpToPadNumber((Jump To Pad Number))_AD for version 22

참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.

The Jump To Pad Number dialog The Jump To Pad Number dialog

Summary Copy Link Copied

This dialog allows you to quickly jump to a specific pad within the design workspace by specifying the pad's number.

If the target pad is already displayed within the main design window, the cursor will simply jump to the center of that pad. If the pad is out of view, the cursor will be positioned at the center of the pad, centered within the main design window (where possible).

Access Copy Link Copied

The dialog can be accessed from the PCB Editor by using the Edit » Jump » Pad command from the main menus.

You can also use the J, P keyboard sequence directly from within the focused workspace.

Options/Controls Copy Link Copied

Pad Number - use this field to specify the number of the pad you wish to jump to. To jump to the pad of a specific component, enter the identifier for the pad in the format <ComponentDesignator>-<PinDesignator> (e.g., U3-12).

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

프린터 출력용 버전

참고

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.

PCB_Dlg-JumpToPadNumberJump To Pad Number_AD

Summary Copy Link Copied

Access Copy Link Copied

Options/Controls Copy Link Copied

Was this page helpful?