Search In: Doc:Documentation: Altium Designer
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 15.1
222120.220.120.019.119.018.118.017.117.016.116.015.1
Close
Search Search on Documentation
Documentation Altium Designer 기술문서 ... ((Dialog Reference))_AD Dialogs((S to Z))_AD

PCB_Dlg-InputCoordDialog_CoordEditSnap Grid(1..1000) _AD

Created: July 28, 2015 | Updated: July 21, 2020 | Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1

The Snap Grid (1..1000) dialog.The Snap Grid (1..1000) dialog.

Summary

This dialog allows the designer to quickly set a different interval size for the Snap grid. The Snap grid pulls the cursor to the nearest point on its defined grid. Depending on how the dialog is accessed, the required value can be applied to both Step X and Step Y, or just Step X, or just Step Y.

For more information about the PCB Grids System, click here.

Access

The dialog can be accessed from both the PCB Editor and PCB Library Editor in the following ways, depending on how the Snap grid is to be changed:

  • Change both Step X and Step Y - use one of the following:
    • Choose the View » Grids » Set Global Snap Grid command, from the main menus.
    • Right-click in the workspace, and use the Snap Grid » Set Global Snap Grid command from the context menu.
    • Use the Shift+Ctrl+G keyboard shortcut.
  • Change Step X only - right-click in the workspace, and use the Snap Grid » Snap Grid X » Set Snap Grid command from the context menu.
  • Change Step Y only - right-click in the workspace, and use the Snap Grid » Snap Grid Y » Set Snap Grid command from the context menu.

Options/Controls

Use the field in this dialog to set the grid interval as required.

The entered grid size is reflected at the left-hand side of the status bar. If the grid was set globally (for both Step X and Step Y), then a single entry for the grid value will be displayed. If the grid was set for Step X or Step Y individually, the individual grid steps will be displayed. The current step sizes for the Snap Grid can also be verified in the Cartesian Grid Editor dialog, when accessed for the Global Board Snap Grid, through the main Grid Manager dialog.
If entering a snap grid setting without specifying units, the entry will be in the default measurement units selected for the design, as determined by the Measurement Unit setting in the Board Options dialog (Design » Board Options). Specifying units when entering the value (mm or mil) will change the default measurement units for the document to those specified, if not currently the default.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.