Altium Designer 기술문서
...
((Dialog Reference))_AD
Dialogs((G to L))_AD
PCB_Dlg-EditLineConstraintsLine Constraints_AD
Created: July 06, 2017 | Updated: July 06, 2017
| Applies to versions: 17.1, 18.0 and 18.1
Now reading version 17.1. For the latest, read: PCB_Dlg-EditLineConstraints((Line Constraints))_AD for version 22
The Line Constraints dialog.
Summary
This dialog allows the designer to change the width of the line currently being placed, and/or the current layer for placement.
Access
From the PCB Editor, or PCB Library Editor, the dialog can only be accessed by pressing the Tab key while in line placement mode.
Options/Controls
- Line Width - use this field to enter a new width for the line. This new width will be applied to the segment currently being placed.
- Current Layer - use this field to switch the layer on which the line is placed. The drop-down menu lists all currently defined (and enabled) layers for the board. The chosen layer will apply to the look-ahead segment of line, that is, the segment after the one currently being placed.
