PCB_Dlg-ChooseObjectClassToRouteChoose Object Class to Route_AD


The Choose Object Class to Route dialog.

Summary

The designer can use this dialog to auto-route selected net classes or component classes.

Access

From the PCB editor, select AutoRoute » Net Class from the toolbar to access Choose Net Classes to Route dialog or select AutoRoute » Component Class to open the Choose Component Classes to Route dialog.

Options/Controls

Main Image List - Select a specific object class (such as a component class or net class) or multiple classes (by keeping the Ctrl key down and selecting classes of interest) and then specify the connections routing mode. Then the autorouter can attempt to route connections associated with these selected object classes.

In the Choose Component Classes to Route dialog, there's an additional Connections Routing Mode region where the designer can configure the routing end for component classes.

  • One end is on a selected object - One of the routing ends is placed on the selected component.
  • Both ends are on selected objects - Both routing ends are placed on the selected components.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.