PCB_Dlg-AskRepourPolygonsRepour Polygons_AD

Now reading version 17.0. For the latest, read: PCB_Dlg-AskRepourPolygons((Repour Polygons))_AD for version 17.1

The Repour Polygons dialog.
The Repour Polygons dialog.

Summary

The Repour Polygons dialog allows designers to easily repour selected modified polygons.

Access

This dialog is opened by moving a selected polygon(s) which has been modified.

Options/Controls

When the dialog opens, designers have the following options:

  • Repour the modified polygon and its dependents (enable the Repour all dependent polygons option and click Yes)
  • Repour only the modified polygon (disable the Repour all dependent polygons option and click Yes)
  • Not repour at all (enable the Repour all dependent polygons option and click No)

The repour behavior for polygons can be set to be automatic, by enabling the Always repour polygons on modification (PCB Editor - General page of the Preferences dialog). The Repour Polygon dialog only appears when the Always repour polygons on modification option is disabled.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.