Altium Designer 기술문서
...
PCB Design Objects in Altium Designer
Working with a Bending Line Object on a PCB in Altium Designer
Configuring PCB Bending Line Object Properties in Altium Designer
Created: November 10, 2020 | Updated: April 10, 2021
| Applies to version: 21
This document is no longer available beyond version 21. Information can now be found here: Bending Line Properties for version 25
Parent page: Bending Line
PCB Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in the following way.
- Post-placement settings – all Bending Line object properties are available for editing in the Properties panel when a placed Bending Line is selected in the design space.
Properties
- Name - the user-definable name of this Bending Line. Naming each Bending Line can help distinguish their function in the design.
- (X/Y) the X and Y location coordinates of the reference vertex of the Bending Line. Edit to change the X or Y position of the Bending Line. Values can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.
The 
icon to the right of this region must be displayed as 
(unlocked) in order to access the location fields. Toggle the lock/unlock icon to change its lock status.
icon to the right of this region must be displayed as (unlocked) in order to access the location fields. Toggle the lock/unlock icon to change its lock status. Stack Regions
List of all Board Regions that are underneath the selected Bending Line.
- Used - enable the checkbox to apply the Bending Line to the named Board Region.
- Name - the name of the Board Region to which this Bending Line can be applied.
Bend Line
- Start (X/Y) - the X and Y location coordinates of the first Bending Line vertex. Edit to change the X or Y position of that Bending Line vertex.
- Angle - the angle that the Bending Line is oriented in the design space.
- Length - the distance between the Start and End vertices.
- End (X/Y) - the X and Y location coordinates of the second Bending Line vertex. Edit to change the X or Y position of that Bending Line vertex.
- Fold Index - value is used to determine the order that the bends are applied when the rigid-flex board is folded in 3D Layout Mode. The bend with the lowest Fold Index value is applied first, through to the highest Fold Index value.
Bend Zone
- Radius - orthogonal distance from the Board Region surface to a point in space that the bending occurs around.
Bend Angle
- Default - the angle of the applied bend. Enter a negative value to apply the bend in the other direction.