EDesignData_Dlg-RevisionSchemeInitialIdEditorFormSet initial values_AD

The Set initial values dialogThe Set initial values dialog

Summary

The Set initial values dialog enables you to manually set the ID for the initial revision of a newly-created Item in an Altium Vault. Modify the various levels of the ID in accordance with the chosen Revision Naming Scheme.

For information about revision naming schemes, see Item Revision Naming Schemes.

Access

The dialog is accessed by clicking the  button in the Revision ID field of the Edit Item dialog (right-click on an Item in the Vaults panel then choose Properties).

Access to the Set initial values dialog is only possible provided you have enabled the Allow manual initial revision Id option, on the Data Management – Vaults page of the Preferences dialog.

Options/Controls

  • Level <0> initial ID - use the  buttons to select the desired revision ID of the Level shown within the < >. You can also enter the desired value in the textbox.
The ID of the Item's first planned revision can be changed at any point after the Item is created and before data is released into that initial revision (i.e., it is still in the Planned state).
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.