EDAImporter_Dlg-ImporterSettingsImporter Settings_AD

The Importer settings dialog

Summary Copy Link Copied

The Importer settings dialog allows you to control design rules, missing vias, keep-out conversions, and other various options during the import process.

Access Copy Link Copied

The dialog is accessed by clicking Importer Options on the PADS PCB Library ASCII File Import Options dialog.

Options/Controls Copy Link Copied

Design Rules - use the following options to control which design rules are imported during the import process.

• Import Clearance Rules - enable to import all clearance design rules.
• Import Routing Rules - enable to import all routing rules.
• Import High Speed Rules - enable to import all high speed rules.

Keep-Out Options - use the following options to control which keep-out options are imported during the import process.

• Import Placement Keep-Outs As Rooms - enable to import placement keep-outs as rooms.
• Import Trace & Copper Keep-Out Regions - enable to import all trace and copper keep-out regions.
• Import Copper Pour & Plane Keep-Outs As Cut-Out Regions  - enable to import all copper pour and plane keep-outs as cut-out regions.

Internal Plane Options - use the following options to control internal planes during the import process.

• Plane Pullback Distance - enter the required distance in the textbox.
• Rebuild All Internal Planes - enable to rebuild all internal planes.

Options - use the following to enable/disable additional options, e.g., missing vias.

• Add Missing Via On Route Layer Change - enable to add missing vias when the route layer is changed.
• Generate Teardrops - enable to generate teardrops.
• Generate Rules For Thermals In Pad Stacks - enable to generate rules for thermals in pad stacks.
• Change Attributes For Used Layers - enable to change attributes for used layers.
• Override Pad Inner Value With Largest Found - enable to override inner value of the pad with the largest value found.