Configuring Draftsman Circle Object Properties in Altium Designer

Parent page: Circle

Draftsman object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Circle object properties, or those that can logically be pre-defined, are available as editable default settings on the Draftsman - Defaults page of the Preferences dialog (access from the  button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
  • Post-placement settings – all Circle object properties are available for editing in the Properties panel when a placed Circle is selected in the workspace.

 The Circle object default settings in the Preferences dialog and the Circle mode of the Properties panel     The Circle object default settings in the Preferences dialog and the Circle mode of the Properties panel

The below properties listing applies to the options available in both the Preferences dialog and the object Properties panel.

Location

  • (X/Y) – the X-axis and Y-axis values of the circle's center point.

Properties

  • Radius – the radius (center to perimeter distance) of the selected circle.
  • Line Style – displays and sets the outline weight/style/color.
    • Line Weight  – the line thickness of the circle outline. Use the drop-down menu to choose from a range of line weight presets.
    • Line pattern – the pattern line style of the circle outline. Use the drop-down menu to choose from a range of line style presets.
    • Line color () – click to open the outline color selector drop-down, which includes options for preset colors, HEX/RGB color values, the graphic selection of color shades, and variable color opacity.
  • Fill Style – displays and sets the circle fill pattern and color. Use the associated pattern and fill buttons to specify colors for the fill and/or hatch pattern.
    •  -  click to open a drop-down to set the fill pattern attributes:
      • Pattern – the graphic pattern for the fill. Select Solid fill or an ANSI pattern from the drop-down menu. Select a no-fill preset or an opacity level of 0% to set the color as transparent.
      • Scale – the relative line spacing of the applied ANSI hatch pattern.
      • Rotation – the angle of the ANSI hatching lines, where a value of 0 is equivalent to 45°.
      • Hatch Thickness – the line weight of the ANSI pattern lines.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.