Configuring Draftsman Center Mark Object Properties in Altium Designer

Parent page: Center Mark

Draftsman object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Center Mark object properties, or those that can logically be pre-defined, are available as editable default settings on the Draftsman - Defaults page of the Preferences dialog (access from the  button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
  • Post-placement settings – all Center Mark object properties are available for editing in the Properties panel when a placed Center Mark is selected in the workspace.

  The Center Mark object default settings in the Preferences dialog and the Center Mark mode of the Properties panel   The Center Mark object default settings in the Preferences dialog and the Center Mark mode of the Properties panel

The below properties listing applies to the options available in both the Preferences dialog and the object Properties panel.

Style

  • Line Style – select the thickness, graphic style and color of the Center Mark cross-hair lines.

Properties

  • Rotation – specify the rotation angle of the Center Mark cross-hair graphic, which can be used to document the angular placement of circles/arcs in a drawing. In this case, a placed Angular Dimension uses one line of a Center Mark cross as an angle dimension reference; see  example.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.