ActiveBOM_Dlg-LineNumberOptionsDialogLine Number Options_AD

Created: May 29, 2019 | Updated: June 26, 2019 | Applies to versions: 19.0, 19.1, 20.0, 20.1, 20.2 and 21

Now reading version 19.1. For the latest, read: ActiveBOM_Dlg-LineNumberOptionsDialog((Line Number Options))_AD for version 22

참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.

The Line Number Options dialog The Line Number Options dialog

Summary Copy Link Copied

The Line Number Options dialog is used to configure the numbering start value and increment.

Access Copy Link Copied

In an ActiveBOM, click the drop-down to the right of the Set Line Number button () then select the Line # options command.

Options/Controls Copy Link Copied

Start number - the value to use if the first Line # cell is empty.
Increment - increment each blank Line # field by this amount.

Click the main region of the Set Line Number button to number the lines per the settings defined in the dialog.

The values entered in the dialog are retained for subsequent uses of the Line # command.

Tip Copy Link Copied

If all of the line numbers have already been defined and the Line # command is run again, the Line numbering dialog will open.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

프린터 출력용 버전

참고