Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 4
43.23.13.02.12.01.11.0
Close
検索 Search on Documentation

Configuring Schematic Sheet Entry Object Properties in Altium NEXUS

Created: 4月 09, 2021 | Updated: 8月 23, 2021 | Applies to version: 4

This document is no longer available beyond version 4. Information can now be found here: Sheet Entry Properties for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Sheet Entry

Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Sheet Entry object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (access from the button at the top-right of the design space). Select the object in the Primitive List to reveal its options on the right.

  • Post-placement settings – all Sheet Entry object properties are available for editing in the Sheet Entry dialog and the Properties panel when a placed Sheet Entry is selected in the design space.

If the Double Click Runs Interactive Properties option is disabled (default) on the Schematic - Graphical Editing page of the Preferences dialog, when the primitive is double-clicked or you right-click on a selected primitive then choose Properties, the dialog will open. When the Double Click Runs Interactive Properties option is enabled, the Properties panel will open. 
While the options are the same in the dialog and the panel, the order and placement of the options may differ slightly. 

Properties

  • ​Name - the name of the sheet entry.
  • I/O Type - use the drop-down to select the I/O type for the sheet entry. 
  • ​Harness Type - use the drop-down to select the type of harness.
  • Font - use the controls to select the font, font size, font color, and add any desired special characteristics to the font, such as bold, italics, and underlining.
  • Kind - use the drop-down to select the kind of text.
  • Border Color - click the color box to access controls to select the border color.
  • Fill Color - click the color box to access controls to select the border color.

General (Net)

Displays the properties of the nets assigned to the object. Update as needed.

The Power Net and High Speed fields become available after a directive has been added to the object.

Parameters (Net)

  • Selection buttons - click the desired objects to display in the grid.  
  • Add - use the drop-down to add the desired object(s) then define the values.
The Add button becomes available after a directive has been added to the object.
If the Net property of the object is entered before it is placed and the value entered has a numeric ending, each subsequent object will auto-increment this numeric value. This behavior is configured in the Auto-Increment During Placement options on the Schematic – General page of the Preferences dialog. For sheet entries, only the Primary field applies; the Secondary field applies when the object has multiple fields, such as a Pin.
 
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.