PCB_Cmd-BrowsePrimitivesBrowsePrimitives_AD

Created: 7月 27, 2017 | Updated: 3月 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

現在、バージョン 3.0. をご覧頂いています。最新情報については、バージョン PCB_Cmd-BrowsePrimitives((BrowsePrimitives))_AD の 5 をご覧ください。

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Commands

The following pre-packaged resources, derived from this base command, are available:

Browse Objects

Applied Parameters: Objects=Component,Net

Summary

This command is used to access the Board Insight pop-up that lists all components and/or net objects currently under the cursor. This pop-up is part of the wider Board Insight system - a configurable system of features that give you complete control over viewing and working with your PCB design.

Access

This command can be accessed from the PCB Editor by:

Choosing the Tools » Browse Objects command from the main menus.
Using the Shift+X keyboard shortcut.

Use

After launching the command, the Board Insight pop-up will appear. The pop-up includes a list of all components and/or nets under the cursor and a graphical display of the object currently chosen in the list. From the list you can edit, select or zoom on any of the objects. The list is hierarchical allowing you, for example, to drill down for complete detail on the primitive objects associated with the higher-level component or net.

Tips

Since the pop-up acts on objects under the cursor, it is advised to access the command using its shortcut.

Browse Violations

Applied Parameters: Objects=Violation

Summary

This command is used to access the Board Insight pop-up that lists all violations (of defined Design Rules) currently under the cursor. This pop-up is part of the wider Board Insight system - a configurable system of features that give you complete control over viewing and working with your PCB design.

Access

This command can be accessed from the PCB Editor by:

Choosing the Tools » Browse Violations command from the main menus.
Using the Shift+V keyboard shortcut.

Use

After launching the command, the Board Insight pop-up will appear. The pop-up includes a list of all violations (of defined Design Rules) under the cursor, and a graphical display of the object currently chosen in the list. From the list you can edit, select or zoom on any of the objects. The list is hierarchical allowing you, for example, to drill down for complete detail on the primitive objects associated with a particular violation.

Tips

Since the pop-up acts on objects under the cursor, it is advised to access the command using its shortcut.

印刷用ページ

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

PCB_Cmd-BrowsePrimitivesBrowsePrimitives_AD

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Was this page helpful?