Altium Designer Home
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
WorkspaceManager_Dlg-RevisionIdEditorFormCustom Revision ID_AD
Created: 12月 28, 2021 | Updated: 12月 28, 2021
| Applies to version: 21
This document is no longer available beyond version 21.0. Information can now be found here: Custom Revision ID Dialog for version 25
The Custom Revision ID dialog
Summary
The Custom Revision ID dialog allows you to manually specify the revision of the target item into which the generated data will be released.
Access
The dialog is accessed in the Configure Server Release stage (Stage 1) of the Project Releaser (Project » Project Releaser) by clicking on the Target Revision link then choose Custom from the drop-down menu.
Options/Controls
Depending on the level revision naming scheme employed, there may be up to three Level ID types.
- Level 2 ID - use the up/down buttons to select the desired revision ID. You can also enter the desired value in the textbox.
- Level 1 ID - use the up/down buttons to select the desired revision ID. You can also enter the desired value in the textbox.
- Level 0 ID - use the up/down buttons to select the desired revision ID. You can also enter the desired value in the textbox.