WorkspaceManager_Dlg-ConfirmManualMatchFormMatch Manually_AD

現在、バージョン 20. をご覧頂いています。最新情報については、バージョン WorkspaceManager_Dlg-ConfirmManualMatchForm((Match Manually))_AD の 20.2 をご覧ください。

The Match Manually dialog
The Match Manually dialog

Summary

The Match Manually dialog is used to choose whether to manually match nets if there are nets that do not match on both sides (between the PCB and schematic). 

Access

The dialog is accessed after updating a document when one or more nets are not able to be matched between the PCB and schematic. For example, it appears after a net name has been changed on the PCB or schematic, but the net name has not been changed on the corresponding design document. 

Options/Controls

  • Don't Show This Again - click to not show this dialog the next time nets cannot be matched.
The state of this option is retained in the [Comparison Options] section of the project file. When Confirm=-1 the Match Manually dialog will display, when Confirm=0 the dialog does not display. Always create a copy of the file before attempting to edit it in a text editor.
  • Yes - click to open the Match dialog in which you can manually match any unmatched schematic nets to unmatched PCB nets.
  • No - click to remove the existing unmatched nets from the PCB and add the new nets that do not currently exist on the PCB. The Engineering Change Order dialog will open.
 
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェア サブスクリプション の様々なレベルに含まれる機能と、Altium 365 プラットフォーム で提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して 詳細を確認してください。