WorkspaceManager_Cmd-VaultCategory_CreateComponentVaultCategory_CreateComponent_AD

Created: 6月 24, 2021 | Updated: 6月 30, 2021 | Applies to version: 21

This document is no longer available beyond version 21.0. Information can now be found here: Creating a New Component from the Projects Panel for version 25

Parent page: WorkspaceManager Commands

The following pre-packaged resource, derived from this base command, is available:

Create Component

Applied Parameters: None

Summary

This command is used to create a new component in an Altium Designer Workspace.

For more information about on-site servers and Workspaces, see Altium Concord Pro.

This command is only available if you are connected to an on-site server or Altium Designer Workspace.

Access

When signed into a Workspace, right-click on the entry in the Projects panel then choose Create Component from the menu.

Use

After the command is selected, the Create new component dialog opens in which you can select the component type. After clicking OK, the component editor opens in which you can configure the new component.

印刷用ページ

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェアサブスクリプションの様々なレベルに含まれる機能と、Altium 365 プラットフォームで提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して詳細を確認してください。

WorkspaceManager_Cmd-VaultCategory_CreateComponentVaultCategory_CreateComponent_AD

Summary

Access

Use

Was this page helpful?