SystemDesigner_Cmd-RotateSelectionRotateSelection_AD

Created: 2月 06, 2023 | Updated: 2月 06, 2023 | Applies to version: 21

This document is no longer available beyond version 21.0. Information can now be found here: Multi-board Schematic Editor Moving Shortcuts for version 25

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None

Summary

This command is used to rotate one or more selected module objects in a counter-clockwise direction.

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

With at least one module object selected, this command can be accessed from the Multi-board Schematic Editor by:

First, ensure that all modules that you wish to include in the rotation are selected in the main workspace.

After launching the command, the selected modules will be rotated counter-clockwise by 90°.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェアサブスクリプションの様々なレベルに含まれる機能と、Altium 365 プラットフォームで提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して詳細を確認してください。