Working with the Nets to Ignore Design Rule on a PCB in Altium Designer

Created: 3月 17, 2022 | Updated: 3月 18, 2022 | Applies to version: 21

This document is no longer available beyond version 21.. Information can now be found here: Nets to Ignore Rule for version 24

Rule category: Placement

Rule classification: Unary

Summary

This rule specifies which nets should be ignored.

All design rules are created and managed within the PCB Rules and Constraints Editor dialog. For a high-level view of working with the design rules system, see Defining, Scoping & Managing PCB Design Rules.

None, the rule applies to all nets targeted by the scope (Full Query).

Contentions are not possible.

Not currently observed by the DRC tool.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェアサブスクリプションの様々なレベルに含まれる機能と、Altium 365 プラットフォームで提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して詳細を確認してください。