PCB_Dlg-SelectionMemoryFormSelection Memory (PCB) _AD

現在、バージョン 15.1. をご覧頂いています。最新情報については、バージョン PCB_Dlg-SelectionMemoryForm((Selection Memory (PCB) ))_AD の 22 をご覧ください。

The Selection Memory dialog.
The Selection Memory dialog.

Summary

The Selection Memory dialog allows the designer to store selected objects to memory and then recall these selections from memory.

Access

This dialog can be accessed in the following ways:

  • Click the  button at the bottom right of the PCB Editor or PCB Library Editor.
  • In the PCB editor, press shortcut keys Ctr+Q to open the dialog. Note that the shortcut keys won't work if another dialog is currently open.

Options/Controls

  • STO - Click a STO  (#) button to store the current selection in that memory slot.
  • Clear - Click this button to clear the related memory slot.
  • Apply - Click this button to highlight the related memory contents.
  • RCL - Click this button to select  the related memory contents.
  • Memory Slot Status - There are 8 memory slots. This field will show the current status for these memory slots (E.g., Empty, 1 Component, 10 Tracks, etc.).
  • Lock - Check this box to lock the selected objects into selection memory.
  • Mask - When enabled, all objects not falling under the scope of the filter will be masked.
  • Select - When enabled, the filtered objects will be selected in the workspace.
  • Zoom - When enabled, the filtered objects will be zoomed and centered (where possible) in the library editor window. The zoom action can be determined by the Zoom Library Components options set in the Schematic - Library AutoZoom page of the Preferences dialog.
  • Clear Existing - When enabled, previous selections will be cleared.
  • Clear Button - Click to clear the selection status of any selected objects in document.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェア サブスクリプション の様々なレベルに含まれる機能と、Altium 365 プラットフォーム で提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して 詳細を確認してください。