PCB_Dlg-FavoriteInteractiveViaSizesFormChoose Via Sizes_AD

現在、バージョン 16.0. をご覧頂いています。最新情報については、バージョン PCB_Dlg-FavoriteInteractiveViaSizesForm((Choose Via Sizes))_AD の 21 をご覧ください。

The Choose Via Sizes dialog.
The Choose Via Sizes dialog.

Summary

Via sizes are typically affected by rules set in the PCB Editor - Interactive Routing page of the Preferences dialog. When the Via Size Mode option (under the Interactive Routing Width Sources region of the Preferences dialog) is set to User Choice, designers can use the Choose Via Sizes dialog to custom define Via hole and diameter sizes.

Access

Press Shift+V while interactively routing.

Options/Controls

Select a Via in the left-hand pane of the dialog to view and edit the sizes for that Via. You can select a Via simply by clicking on it. Information for the selected Via is then viewable on the right-hand side of the dialog.

  • Diameters - This information is view only in the Choose Via Sizes dialog, but allows designers to see whether the Via's diamater is set to Simple (Via hole size and diameter are the same through all layers), Top-Middle-Bottom (Different Hole Size and Diameters can be set at Top Layer, Middle Layer and Bottom Layer respectively), or Full Stack (Different Hole Size and Diameters can be edited at each layer, including all signal layers and planes).
  • Hole Size - Click in the text field to edit the hole size (the inner diameter) of the Via.
  • Diameter - Click in the text field to edit the outer diameter of the Via. For Vias set to Top-Middle-Bottom or Full Stack, designers will need to individually enter a diameter for each available layer.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェア サブスクリプション の様々なレベルに含まれる機能と、Altium 365 プラットフォーム で提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して 詳細を確認してください。