PCB_Dlg-EqualizeNetsOptionsFormEqualize Nets_AD

The Equalize Nets dialog

Summary Copy Link Copied

The Equalize Nets dialog is used to match the length of nets identified by the Matched Lengths design rule. Before launching the dialog, ensure you have set up a Matched Lengths design rule covering the nets whose length you wish to equalize.

Access Copy Link Copied

The dialog is accessed from the PCB editor by clicking Tools » Equalize Net Lengths from the main menus. See the Equalize Net Lengths command for more information.

Options/Controls Copy Link Copied

• Style - specify the corner style for the tracks. Options include 90 Degrees, 45 Degrees, and Rounded.
• Gap - specify the gap between two adjacent tracks.
• Amplitude - specify the tuning amplitude when equalizing nets.