PCB_Dlg-ComponentRuleCheckComponent Rule Check_AD

現在、バージョン 20. をご覧頂いています。最新情報については、バージョン PCB_Dlg-ComponentRuleCheck((Component Rule Check))_AD の 21 をご覧ください。
 

The Component Rule Check dialog
The Component Rule Check dialog

Summary

The Component Rule Check dialog allows you to specify rules to check a component that is currently active in the PCB library.

Access

The dialog is accessed from the PCB Library Editor by clicking Reports » Component Rule Check from the main menus.

Options/Controls

Duplicate

  • Pads - enable this option to check for components with duplicate pads.
  • Primitives - enable this option to check for components with duplicate primitives.
  • Footprints - enable this option to check for components with duplicate footprints.

Constraints

  • Missing Pad Names - enable this option to check for components with missing pad names.
  • Mirrored Component - enable this option to check for components that are mirrored.
  • Offset Component Reference - enable this option to check for components with the component reference offset.
  • Shorted Copper - enable this option to check for components with shorted copper.
  • Unconnected Copper - enable this option to check for components with unconnected copper.
  • Check All Components - enable this option to check all components in the library.
After clicking OK, a Component Rule Check Report with the extension *.ERR will be generated that lists the violations based on the options you enabled.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェア サブスクリプション の様々なレベルに含まれる機能と、Altium 365 プラットフォーム で提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して 詳細を確認してください。

Content