PCB_Cmd-MoveBoardMoveBoard_AD

Created: 2月 29, 2016 | Updated: 4月 30, 2020 | Applies to versions: 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21

現在、バージョン 20. をご覧頂いています。最新情報については、バージョン PCB_Cmd-MoveBoard((MoveBoard))_AD の 22 をご覧ください。

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:

Move Board

Applied Parameters: Object=Board

Summary

This command is used to move the entire board - the board shape, plus all design objects within that shape - to another position in the current document.

Access

This command can be accessed from the PCB Editor when configured in Board Planning Mode by choosing the Design » Move Board command from the main menus.

The current viewing mode for the PCB document can be changed using the corresponding commands from the main View menu. To switch to Board Planning Mode, use the command of the same name or use the 1 keyboard shortcut.

Use

After launching the command, an outline copy of the board shape will be attached to the cursor, held by its bottom-left corner. Move the shape to the desired new location within the workspace then click or press Enter to effect placement. All constituent design objects will be moved also to maintain position within the board shape.

To cancel without moving, right-click or press Esc.

印刷用ページ

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェアサブスクリプションの様々なレベルに含まれる機能と、Altium 365 プラットフォームで提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して詳細を確認してください。

PCB_Cmd-MoveBoardMoveBoard_AD

Summary

Access

Use

Was this page helpful?