Altium Designer Home
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
Dlg-ExportEDMDBaselineExport EDMD Baseline_AD
Created: 3月 01, 2019 | Updated: 2月 09, 2021
| Applies to versions: 19.0, 19.1, 20.0, 20.1 and 20.2
現在、バージョン 20.0. をご覧頂いています。最新情報については、バージョン Dlg-ExportEDMDBaseline((Export EDMD Baseline))_AD の 21 をご覧ください。
The Export Baseline dialog
Summary
The Export Baseline dialog is used to create an IDX file (MCAD Baseline.idx). This file type is used for collaborating between ECAD and MCAD domains. Altium Designer facilitates this collaboration using the Mechanical CAD Collaboration extension, which is necessary to access this dialog.
Access
The dialog is accessed by performing the following steps:
- From the PCB editor, click the Panels button at the lower-right of the workspace then select Mechanical CAD Collaboration or click View » Panels » Mechanical CAD Collaboration from the main menus.
- In the Mechanical CAD Collaboration panel, click the Export Baseline button.
The Mechanical CAD Collaboration extension (shown below) must be installed to access this dialog.
The extension can be found on the Purchased tab of the Extensions & Updates page (accessed by using the
drop-down at the top-right of the workspace then choosing Extensions and Updates).
The extension can be found on the Purchased tab of the Extensions & Updates page (accessed by using the
drop-down at the top-right of the workspace then choosing Extensions and Updates).Options/Controls
- Ignore Duplicate Pad Designators - enable to ignore pad designators that are duplicates when exporting.
- Export Copper - enable to include copper in the export.
- Warning - click to open a text warning regarding exporting copper.
- Export Tracks, Export Copper Regions, Export Vias, Export Pads, Export Internal Layers - enable the objects you want to export into the file. Options that are not selected will not be included in the exported file. These options are accessible only when Export Copper is disabled (not checked).