他社ツールとのインターフェース

Altium's design software is probably just one of many engineering design environments that you work with, or need to interface to.

Perhaps you need to interface to another design and analysis platform to perform a power simulation, or perhaps you need to import an older design that was developed in another design environment. Whatever the reason, it's likely that one day you'll need to be able to interface to another design tool.

Performing an Import or Export

Interfacing to another design environment is all about transferring design data. That can either be done by reading/writing the design data from/to a different file format, or directly transferring data via software API's.

Import actions are performed via the File » Import command. Also, many of the importers can be accessed via the Import Wizard (File » Import Wizard). Using the Wizard allows related files, such as design files and their libraries, to be batch imported.

Export outputs can be created by adding the required outputs in an Outputjob file (from the Edit » Add Export Outputs sub-menus or from the menus associated with the [Add New Export Output] control, at the bottom of the Export Outputs region, in the main job configuration window) followed by generating the outputs from the file or as part of the Project Release process. Alternatively, export actions are performed via the File » Export menu, in the appropriate editor.

Interfacing to EDA Design Tools

The table below summarizes EDA design tools and their file formats supported for import to and/or export from Altium Designer.

Creating a Netlist

Altium Designer supports creation of a netlist, in the indicated format, from all relevant source documents in the active project or from the active source document. The related indexed commands are accessed from the schematic editor, from the Design » Netlist For Project or Design » Netlist For Document sub-menu, respectively.

A Netlist Output, with the indicated Data Source, can also be added to the active Output Job Configuration file by choosing a command from the Edit » Add Netlist Outputs sub-menus or from the menus associated with the [Add New Netlist Output] control, at the bottom of the Netlist Outputs region, in the main job configuration window. Each sub-menu relates to a specific format of netlist, n, while each entry on a netlist format sub-menu relates to a specific Data Source, m.

The following netlist formats are supported:

• Cadnetix
• Calay
• EDIF for PCB
• EESof
• Intergraph
• Mentor BoardStation
• MultiWire
• OrCad/PCB2
• PADS
• Pcad for PCB
• PCAD
• PCADnlt
• Protel2
• Protel
• Racal
• RINF
• SciCards
• Tango
• Telesis
• Wirelist
• XSpice

The majority of command entries to generate netlist formats are only available in the menus, provided the associated functionality is installed as part of your Altium Designer installation. To view and change functionality available to your installation, access the Extensions & Updates view (accessed by clicking on the  control at the top-right of the design space and choosing the Extensions and Updates command from the menu). From the Installed page, click the Configure control at the top-right to access the Configure Platform page. For those netlisters listed in red above, ensure that the Netlisters entry in the Importers\Exporters region is enabled. For the PADS netlister, ensure that the PADS entry in this region is enabled. For the XSpice netlister, ensure that the Mixed Simulation entry, in the Platform Extensions region, is enabled. Once the required functionality is enabled, click Apply. You will need to restart Altium Designer for the changes to take effect.

Depending on the format of netlist you have chosen to create, launching the command will either generate the netlist directly, or an intermediate dialog will appear, allowing you to define specific format-related options. The generated file(s) will initially be closed.

Interfacing to Other Design Tools

Altium Designer can also interface to other design tools (MCADs, CAEs, etc.), for example, using neutral file formats. The table below summarizes other file formats supported for import to and/or export from Altium Designer.