Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 2.1
543.23.13.02.12.01.11.0
Close
Search Search on Documentation
Documentation Altium NEXUS Documentation ... Dialog Reference G to L

Layer Class Name

Created: October 12, 2017 | Updated: March 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1 and 3.2
Now reading version 2.1. For the latest, read: Layer Class Name for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Layer Class Name dialogThe Layer Class Name dialog

Summary

The Layer Class Name dialog is used to enter a new name for a layer class.

Access

The dialog is accessed by right-clicking a layer on the Layers tab of the Gerber Setup dialog or the ODB++ Setup dialog then selecting Add Layer Class or Edit Layer Class. 

The Edit Layer Class option is accessible only when a layer class is selected in the Layers to Plot region of the Gerber Setup dialog or ODB++ Setup dialog.

Options/Controls

  • Layer Class Name - enter the desired layer class name or use the drop-down to select from the available layer names.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.