Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 1.0
543.23.13.02.12.01.11.0
Close
Search Search on Documentation
Documentation Altium NEXUS Documentation ... Dialog Reference A to F

DCode

Created: September 27, 2017 | Updated: March 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1 and 3.2
Now reading version 1.0. For the latest, read: DCode for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The DCode dialogThe DCode dialog

Summary

The DCode dialog allows you to specify a DCode string for an aperture.

Access

This dialog is accessed by clicking New on the Apertures tab of the Gerber Setup dialog. 

The Embedded Apertures (RS274X) option on the Apertures tab must be disabled to access the New option.

Options/Controls

Enter a number from 10 to 999 for the aperture DCode string.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.