SendToVault

Created: May 09, 2019 | Updated: May 09, 2019 | Applies to versions: 2.0, 2.1, 3.0, 3.1 and 3.2

Now reading version 2.1. For the latest, read: SendToVault for version 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: WorkspaceManager Commands

The following pre-packaged resource, derived from this base command, is available:

Send Active Schematic to Server

Applied Parameters: ObjectKind=Document

Summary

This command is used to send the active schematic document to a server.

Access

With the desired schematic active, this command can be accessed by clicking File » Send to server from the main menus.

Use

Ensure that the schematic you want to send to the server is the active document.

After launching the command, a trimmed down version of the Explorer panel (titled Choose Planned Item Revision) will open in which you can create the new managed schematic sheet by clicking Add an item then choosing Create Item » Managed Schematic Sheet to open the Create New Item dialog.

Tips

Before launching the command, ensure that the schematic you want to send to the server is the active document.

Printer-friendly version

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

SendToVault

Summary

Access

Use

Tips

Was this page helpful?