RotateSelectionClockwise

Created: September 18, 2017 | Updated: March 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: SystemDesigner Commands

The following pre-packaged resource, derived from this base command, is available:

Rotate Selected Modules Clockwise

Applied Parameters: None

Summary

This command is used to rotate one or more selected module objects in a clockwise direction.

For a high-level look at multi-board design within Altium NEXUS, see Designing Systems with Multiple Boards.

Access

With at least one module object selected, this command can be accessed from the Multi-board Schematic Editor by:

Choosing the Edit » Move » Rotate Selection Clockwise command from the main menus.
Using the Shift+Spacebar keyboard shortcut.

Use

First, ensure that all modules that you wish to include in the rotation are selected in the main workspace.

After launching the command, the selected modules will be rotated clockwise by 90°.

Printer-friendly version

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

RotateSelectionClockwise

Summary

Access

Use

Was this page helpful?