Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 1.0
43.23.13.02.12.01.11.0
Close
Search Search on Documentation
Documentation Altium NEXUS Documentation ... Schematic Query Functions Fields

Orientation

Created: November 02, 2018 | Updated: March 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1 and 3.2
Now reading version 1.0. For the latest, read: Orientation for version 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Schematic Query Functions - Fields

Summary

Returns all designator, harness connector type, IEEE symbol, net label, off sheet connector, parameter, parameter set, part, pin, power port, probe, sheet symbol designator, sheet symbol file name, and text string objects whose Orientation property complies with the Query.

Syntax

Orientation = Orientation_String
Orientation <> Orientation_String

Orientation_String must be one of the strings from the following list:

  • '0 Degrees'
  • '90 Degrees'
  • '180 Degrees'
  • '270 Degrees'

Example Usage

Orientation = '90 Degrees'
Returns all designator, harness connector type, IEEE symbol, net label, off sheet connector, parameter, parameter set, part, pin, power port, probe, sheet symbol designator, sheet symbol file name, and text string objects whose Orientation property is 90 Degrees.

Orientation <> '180 Degrees'
Returns all objects except designator, harness connector type, IEEE symbol, net label, off sheet connector, parameter, parameter set, part, pin, power port, probe, sheet symbol designator, sheet symbol file name, and text string objects whose Orientation property is 180 Degrees.

Orientation <> '' && Orientation <> '180 Degrees'
Orientation > '' && Orientation <> '180 Degrees'
Returns all designator, harness connector type, IEEE symbol, net label, off sheet connector, parameter, parameter set, part, pin, power port, probe, sheet symbol designator, sheet symbol file name, and text string objects whose Orientation property is not 180 Degrees.

Tips

  1. The Orientation property is only defined for designator, harness connector type, IEEE symbol, net label, off sheet connector, parameter, parameter set, part, pin, power port, probe, sheet symbol designator, sheet symbol file name, and text string objects.
  2. The single quote characters (') at the start and end of Orientation_String are mandatory.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.