Altium NEXUS Documentation
...
Fields
M to R
Pad_CornerRadius_MidLayer20
Created: August 02, 2022 | Updated: August 02, 2022
| Applies to version: 4
This document is no longer available beyond version 4. Information can now be found here: Pad_CornerRadius_MidLayerN for version 5
Parent page: PCB Query Functions - Fields
Summary
Returns pad objects whose Pad Corner Radius (%) (Mid Layer 20) property complies with the Query.
Syntax
Pad_CornerRadius_MidLayer20 = CornerRadius_String
Pad_CornerRadius_MidLayer20 <> CornerRadius_String
CornerRadius_String specifies the corner radius, expressed as a percentage.
Example Usage
Pad_CornerRadius_MidLayer20 = '50%'
Returns all pad objects whose Pad Corner Radius (%) (Mid Layer 20) property equals 50%.
Pad_CornerRadius_MidLayer20 <> '30%'
Returns all objects except for pad objects whose Pad Corner Radius (%) (Mid Layer 20) property equals 30%.
Tips
- The single quote characters (') at the start and end of
CornerRadius_Stringare mandatory. - For simple pads (with Stack Mode set to Simple) the Pad Corner Radius (%) (Mid Layer 20) property will be the same as the Pad Corner Radius (%) (All Layers) property, since the specified Corner Radius is used for all signal layers.
- For Top-Middle-Bottom pads (with Stack Mode set to Top-Middle-Bottom) the Pad Corner Radius (%) (Mid Layer 20) property will be the same as the Pad Corner Radius (%) (Mid Layer 1) property, since the Corner Radius specified for Signal Layer 1 is applied to all internal ('middle') signal layers.
- The Pad Corner Radius (%) (Mid Layer 20) property is only defined for pad objects.