Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 4
43.23.13.02.12.01.11.0
Close
Search Search on Documentation
Documentation Altium NEXUS Documentation ... PCB Query Functions Attribute Checks

TraceHeight

Created: August 02, 2022 | Updated: August 02, 2022 | Applies to version: 4

This document is no longer available beyond version 4. Information can now be found here: TraceHeight for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Query Functions - Attribute Checks

Summary

Returns all arc, fill, and track objects, on signal layers whose copper thickness complies with the Query.

The Copper Thickness for a signal layer is defined within the Layer Stack Manager (Design » Layer Stack Manager).
Arc, fill, and track objects on the Multi-Layer are not returned. Because different signal layers can have different Copper Thickness properties, a Copper Thickness property for the Multi-Layer is not always meaningful.

Syntax

TraceHeight : Number

The entered thickness is always in units of mils regardless of the measurement unit chosen for the board. (1 mil = 0.001 inch).

Example Usage

TraceHeight = 1.4
Returns all arc, fill, and track objects, on signal layers whose copper thickness is equal to 1.4mil.

TraceHeight Between 1.1 And 1.5
Returns all arc, fill, and track objects, on signal layers whose copper thickness is greater than, or equal to, 1.1mil, and less than, or equal to, 1.5mil.

TraceHeight >= 1.2
Returns all arc, fill, and track objects, on signal layers whose copper thickness is greater than, or equal to, 1.2mil.

TraceHeight < 1.3
Returns all objects except arc, fill, and track objects, on signal layers whose copper thickness is greater than, or equal to, 1.3mil.

TraceHeight = 2.8 || (IsArc Or IsFill Or IsTrack && OnMultiLayer)
Returns all arc, fill, and track objects, on signal layers whose copper thickness is equal to 2.8mil, and all arc, fill, and track objects on the Multi-Layer.

Tips

  1. This function is an alias for the TraceCopperHeight function.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.