Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 1.1
43.23.13.02.12.01.11.0
Close
Search Search on Documentation
Documentation Altium NEXUS Documentation ... PCB Query Functions Attribute Checks

NetLength

Created: September 11, 2015 | Updated: August 10, 2021 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1 and 3.2
Now reading version 1.1. For the latest, read: NetLength for version 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Query Functions - Attribute Checks

Summary

Returns Net objects where the total length of arcs and tracks in those nets complies with the Query.

The length of each track is the (Pythagorean) distance between its end points, and is equal to SQRT(SQR(X1 - X2) + SQR(Y1 - Y2)), where X1,Y1 are the coordinates of one end of the track, and X2,Y2 are the coordinates of its other end. The length of each arc is the product of its Radius and the difference between its End Angle and Start Angle, when that difference is measured in units of radians. (180 degrees = pi radians.)

Syntax

NetLength : Number

The entered length is always in units of mils, irrespective of the measurement unit chosen for the board. (1 mil = 0.001 inch).

Example Usage

NetLength = 30000
Returns all Net objects where the total length of arcs and tracks in those nets is equal to 30000mil.

NetLength >= 15000
Returns all Net objects where the total length of arcs and tracks in those nets is greater than or equal to 15000mil.

NetLength <> 5500
Returns all Net objects where the total length of arcs and tracks in those nets is not equal to 5500mil.

Tips

  1. The associated child objects of the complying Net objects are also returned.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.