Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 1.0
43.23.13.02.12.01.11.0
Close
Search Search on Documentation
Documentation Altium NEXUS Documentation ... PCB Query Functions Attribute Checks

CompCenterOfPadsY

Created: September 12, 2015 | Updated: August 09, 2021 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1 and 3.2
Now reading version 1.0. For the latest, read: CompCenterOfPadsY for version 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Query Functions - Attribute Checks

Summary

Returns component objects when the Y-Coordinate of the centroid of their pads complies with the Query.

Syntax

CompCenterOfPadsY : Number

The entered coordinate is always in units of mils, irrespective of the measurement unit chosen for the board. (1 mil = 0.001 inch).

Example Usage

CompCenterOfPadsY = 1200
Returns all component objects when the Y-Coordinate of the centroid of their pads is equal to 1200mil.

CompCenterOfPadsY >= 1500
Returns all component objects when the Y-Coordinate of the centroid of their pads is greater than, or equal to, 1500mil.

CompCenterOfPadsY Between 1000 And 1400
Returns all component objects when the Y-Coordinate of the centroid of their pads is greater than, or equal to, 1000mil, and less than, or equal to, 1400mil.

CompCenterOfPadsY < 800
Returns all objects except component objects when the Y-Coordinate of the centroid of their pads is greater than, or equal to, 800mil.

Tips

  1. The associated child objects of the complying component objects are also returned.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.