Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 3.0
43.23.13.02.12.01.11.0
Close
Search Search on Documentation
Documentation Altium NEXUS Documentation ... EOL - Projects Project Options

Project Options - Library Options

Created: July 21, 2020 | Updated: September 15, 2021 | Applies to versions: 3.0, 3.1 and 3.2
Now reading version 3.0. For the latest, read: Project Options - Library Options for version 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Library Options tab of the Project Options dialog The Library Options tab of the Project Options dialog 

Summary

The Library Options tab of the Project Options dialog allows you to select the format for an integrated library project.

Access

This dialog can be accessed in the following ways:

  • From an integrated library file, click Project » Project Options then select the Library Options tab.
  • Right-click on an integrated library file from the Projects panel, click Project Options then select the Library Options tab.

Options/Controls

  • Integrated Library Format 
    • Original - select to use the original integrated library format. This is used for compatibility with Protel DXP (DXP 2002) software, prior to the advent of Altium NEXUS.

    • Altium NEXUS- select to use Altium NEXUS as the integrated library format (used in all versions of the software since the original Altium NEXUS 2004).

Additional Option

  • Set To Installation Defaults - click to set all options to the installation defaults.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.